QNAP SWI QSW-M2106-4C

QSW-M2106-4C 10GbE and 2.5GbE Layer 2 managed switch for SMB deployment

The QSW-M2106-4C is a Layer 2 network-managed switch with four 10GbE SFP+/RJ45 combo ports and six 2.5 Gigabit ports. Supporting Layer 2 switching and network management via a user-friendly web interface, the QSW-M2106-4C offers easy deployment in high-speed hybrid network environments and provides an entry-level network management solution that can even be used by non-IT professionals. With its high performance, user-friendly management features and desktop a size, the QSW-M2106-4C enables cost-effective network upgrades providing connectivity up to 2.5GbE or 10GbE, while optimising bandwidth and ensuring secure network maintenance.

2.5gbex10gbe. 10GbE connectivity

Offers four 10GbE SFP+/RJ45 combo ports. Compatible with 10GbE and NBASE-T technologies, providing support for five speeds (10 G / 5 G / 2.5 G / 1 G / 100 M) for high-speed networks.

2.5GbE connectivity

Six 2.5GbE RJ45 ports enable an immediate 2.5x increase in network speed using existing Cat 5e cables.

Intuitive management interface

QNAP's QSS switch system is easy to use and provides a dashboard, port management and configuration guide to make central network management intuitive.

Layer 2 networking

Provides Layer 2 management features, such as LACP, VLAN, ACL and LLDP, so IT staff can efficiently monitor network bandwidth and enhance security.

RSTP

One of several network-managed switches with Rapid Spanning Tree Protocol (RSTP) support. Easily and efficiently deploy small to medium-sized networks that provide expandability, redundancy and loop prevention.

Online firmware update

QSS can be updated with a single click, allowing IT staff to maintain network security.

Flexible deployment with multiple 10G SFP+ and Gigabit fibre ports

The QSW-M2106-4C has four 10GbE SFP+/RJ45 combo ports and six 2.5 Gigabit ports, enabling the connection of different devices and a hybrid high-speed network. With SFP+ interfaces, you can use copper cables (DAC) to connect directly to SFP+ devices. You can also, using RJ45 ports, connect 10GBASE-T/NBASE-T devices via RJ45 category 6 (or better) cables. The QSW-M2106-4C is backward compatible with other Ethernet devices.

QSS: User-oriented configuration guide

The QSW-M2106-4C uses the QNAP Switch System (QSS), offering an easy-to-use web user interface with Layer 2 management features and providing additional benefits to make network configuration and management easier.

You can optimise network performance with bandwidth and packet inspection

The QSW-M2106-4C provides bandwidth and packet control functions (e.g. LACP, VLAN, QoS and IGMP Snooping) to enhance network performance through IP address clustering and bandwidth management.

Advanced security and system features

The QSW-M2106-4C provides advanced security and system functions (including ACL, LLDP, RSTP and Flow Control) so administrators can increase network reliability through access control, troubleshooting, loop prevention and packet loss.

Small size makes it easy to use in the office

The QSW-M2106-4C has a compact size and modern design, and its textured surface makes it stand out. The flexible DC power connector enables the QSW-M2106-4C to be universally deployable and easily identify individual ports. Thanks to the comprehensive plug-and-play function, simply connect your devices to the QSW-M2106-4C to start operating immediately.