Aquatuning anticorrosive AntiCorro-Fluid 50ml
When operating a water cooling system, corrosion protection should be used. This very efficient corrosion protection AntiCor-Fluid only needs to be mixed with distilled water in a ratio of 1:50 (corresponds to a concentration of 2%). The contents of this 50ml bottle are therefore sufficient to protect 2.5l of coolant efficiently against corrosion.
Most systems use about 300 to 1000ml, so the small bottle is enough for several systems.
Technical data:
- Colour: Concentrate: slightly brownish; finished coolant: almost clear
- Content: 50ml
Due to the small amount added, the high heat capacity of the water is almost completely retained.
Does not contain glycol, but hydroxyphosphonic acid!
Hazardous if swallowed, keep out of reach of children.
This additive does not contain antifreeze.
Important NOTE:
Only use the additive in "clean" systems. If radiators have not been cleaned, for example, undesirable side effects can occur. There must be no residue of solder, oil, paint or dirt in the cooling system. Clean your radiator before use.