Ready to use coolant which can be poured into the cooling loop without further mixing or dilution. Specially developed for closed cooling loops, highly effective and long-term stable anticorrosive for PC cooling systems. Suitable for loops with multiple different materials (e.g. Copper, brass, plastics, gaskets). The corrosion inhibitors work effectively and protect your system over a long period of time.
Metering is easy, as AT-Protect is filled into the cooling loop undiluted and without further mixing. To ensure proper functionality of the coolant no additional dilution (e.g. with water) is permissible. AT-Protect is non-odorous, colourfast and non-flocking.
AT-Protect UV clear contains no Gylsantine or glycol and hence does not reduce the heat absorption of the water. It is hence perfect for use in high-performance water cooling systems.

Features:
- Low electrical conductivity
- Extra-pure distilled / de-ionized water with an electrical conductivity of 1μS/cm is used in the production of this coolant
- Contains additives against algae and corrosion inhibitors
- Not aggressive against Acrylic, Acetal, rubber or other gasket materials
- Conforms with RoHS regulations

Technical specifications:
Colour: slightly yellowish/transparent
Fluorescence: No Fluorescence
Content: 1000ml

Warning:
Contains Benzotriazol (non respirable). Keep out of the reach of children. In case of contact rinse immediately with plenty of water and seek medical advice.

Note: Manufacturing residues in radiators may lead to unwanted reactions, hence this product must be used with cleaned radiators.

This product was tested for you:
Hardware Factory