Compatible with any Z-Wave and Z-Wave+ controller • Implemented algorithm of smart light source detection • Active power and energy metering functionality • Works with various types of switches – momentary, toggle, three-way, etc. • Soft-start function • LED diode signaling inclusion status, calibration status and MENU levels • Built-in Z-Wave range tester • Dimmer 2 automatically senses faults in wiring, reporting excess temperature, burnt bulb, overvoltage and overload • Advanced configuration options Radio controlled light dimming module, designed to work with various types of light sources. May be connected to two-wire or three-wire configuration. Fibaro Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. New Fibaro Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It features automatic overload protection switch-off and soft start function. In case of non-dimmable light sources only on/off function may be possible (in 3-wire connection). Product Highlights: As a dimmer, works with: • 230V operated conventional incandescent and halogen light sources • 12V operated ELV halogen lamps (with electronic transformers) • 12V operated MLV halogen lamps (with ferromagnetic transformers) • Dimmable LED lamps • Dimmable compact fluorescent CFL tube lamps • Supported dimmable light sources (power factor > 0.5) with minimal power of 5VA using FIBARO Bypass 2 (depending on the type of load) As a switch, works with: • Compact fluorescent lamps • LED lamps • Supported light sources (power factor > 0.5) with minimal power of 5VA using FIBARO Bypass 2 (depending on the type of load)