Natec External SSD enclosure RHINO M.2 NVME USB-C 3.2 horizon blue
Meet the Natec Rhino M.2 NVMe Lite
Here's the Natec Rhino M.2 NVMe Lite - a rugged M.2 NVMe/PCIe SSD media enclosure that will allow you to access the data stored on the drive and provide full protection from damage. Robust and simple design is not all. Natec Rhino M.2 NVMe Lite means compactness, no need to install drivers, but also support for UASP and TRIM technologies that improve disk performance.
Turn your M.2 NVMe/PCIe media into an external drive
Want to use the data stored on your M.2 NMVe/PCIe SSD media? With the Natec Rhino M.2 NVMe Lite it becomes possible. This compact enclosure allows you to use M-dongle media with sizes 2230, 2242, 2260 and 2280 and a maximum capacity of as much as 10 TB.
Instant data transfer
With the USB-C 3.2 Gen 2 x 1 interface, you don't have to worry about the speed of data transfer. It can reach up to 10 Gbps. High performance is also guaranteed by the TRIM command and the UASP protocol, which allows a USB device to execute several commands at the same time without dropping any of them.
Durable and compact
Worried about mechanical damage caused by moving your drive? With the Natec Rhino M.2 NVMe Lite you will protect your equipment. This will be taken care of by the sturdy, all-aluminum casing and the intuitive media mounting system, which makes it rest fully stable inside.
Just plug in
With Natec Rhino M.2 NVMe Lite, your data is always ready to go. It does not require the installation of any drivers. All you have to do is place the media in it and plug it into your computer. Simply.
Everything necessary
In the kit - in addition to the Natec Rhino M.2 NVMe Lite - you'll find a cable (USB-C - USB-C) and a silicone cap to attach the drive. You don't need anything else to get the most out of the Rhino M.2 NVMe Lite.