thermal pad 100x100x1mm (1 piece)
Aquatuning
EAN: 4049469050917
- Mõõtmed: 100x100 mm
- Paksus: 1 mm
Hind
13.95 €
These thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled.
Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads can be cut to any desired size and are therefore suitable for just about any application: From VRAM coolers on graphics cards to VRM blocks on the motherboard. Even large components such as the North- or Southbridge can be equipped with these pads, as they have excellent heat conductivity.
With their many uses, these thermal pads should be amongst any PC-builder's equipment.
Technical data:
Dimensions: 100x100x1mm
Heat conductivity: 1,5 W/mK
Maximum bridgeable gap: 1mm
Electrically non-conductive
Extent of delivery:
1x thermal pad 100x100x1mm (1 piece)
Note: The thermal pads can be compressed to up to half of their height.>
Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads can be cut to any desired size and are therefore suitable for just about any application: From VRAM coolers on graphics cards to VRM blocks on the motherboard. Even large components such as the North- or Southbridge can be equipped with these pads, as they have excellent heat conductivity.
With their many uses, these thermal pads should be amongst any PC-builder's equipment.
Technical data:
Dimensions: 100x100x1mm
Heat conductivity: 1,5 W/mK
Maximum bridgeable gap: 1mm
Electrically non-conductive
Extent of delivery:
1x thermal pad 100x100x1mm (1 piece)
Note: The thermal pads can be compressed to up to half of their height.>
Tehnilised detailid
Mõõtmed100x100 mm
Paksus1 mm
Toode on ainult tellitav
Toodet ei ole hetkel esindustes saadaval.
Võimalik tellida:
Tellimine esindusse 5-17 tööpäeva.21 tk