Krux Orona Midi Tower Korpus Must ATX, mini-ITX, Micro ATX

Krux
Tootekood: KRXD003
  • CPU<: 165 mm
  • GPU<: 340 mm
  • Värvus: Must
  • Korpuse tüüp: ATX
Hind
67.90 €
Kuumakse
7.00 € / kuumakse alates

It sounds a bit like something that would decorate the head of a king, but in fact it would decorate the desk of the greatest badass. Krux Orona is an amazing looking case for your gaming doomsday engine. Roomy like a treasury, airy like palace courtyards.

Keep (air)flow

On the front of the Krux Orona you will find a panel made of air-permeable mesh. Appropriate air exchange is crucial for good cooling of the components, and thanks to this filter in the housing, you will get a clean and strong mountain cloud that the oldest highlanders do not remember. The mesh is attached with a latch, so it can be easily removed and wiped or washed.

Beast Terrarium

Each of us uses technology a little differently. Maybe you have a graphics card with an impressive built-in fan or some gadget with a display with your initials shining on it? The side wall of Orona is equipped with a glass panel that shows all the components as if on a plate. It is mounted on hinges, so even if you often tinker and play with the configuration of components, you do not have to worry about jamming the threads in the mounting screws.

Four 120s in my case

At the start, Krux Orona gives you the certainty of great air flow inside. Right out of the box, you get four 120 mm fans with RGB backlight, three mounted at the front, one at the back. Just one swipe of a finger is enough to make things fresh and colorful inside. Even if you want more, you will still find four free fan slots.

Lots of places

Besides, there will be room in Orona not only for more fans. It is ready to accept a motherboard in the ATX, microATX or Mini-ITX standards. You can also fit large power supply models (up to 190 mm) and a long graphics card (up to 340 mm) there. A whole chest of electronic treasures at your disposal.

Protected on all sides

Like treasures, they cannot be allowed to gather dust, especially with such air movement. In addition to the large front with a mesh that filters out dirt, Krux Orona has two dust filters. One is located at the top of the housing and prevents falling dust, hair and the like from settling, the other is at the bottom of the housing, so nothing gets inside from the floor, which protects, among other things, your valuable power unit.

Krux Orona main features:

  • Air-permeable front panel
  • Hinged glass side panel
  • Four RGB fans
  • Roomy design
  • Three dust filters

Füüsilised andmed

KujutegurATX; Micro-ITX; Micro ATX
Graafikakaardi pikkus kuni340 mm
Protsessori õhkjahuti kõrgus kuni165 mm
Toiteploki ühilduvus190
Kaal5.4 kg
Kõrgus410 mm
Laius210 mm
Sügavus483 mm
VärvusMust
KoostematerjalKarastatud klaas; Metal

Ühenduvus

Kõrvaklapi pesa:Kõrvaklapipistik

Kettasahtlid

2.5"3x 2.5" pesa
3.5"2

Ventilaatoritugi:

Taha paigaldatud1x 120 mm
Ette paigaldatud3x 120 mm
Ülesse võimalik paigaldada2
Taha võimalik paigaldada1; 120
Ette võimalik paigaldada140; 3; 120
Toode on ainult tellitav
Toodet ei ole hetkel esindustes saadaval.
Võimalik tellida:
5 tk
Tellimine esindusse 4-8 tööpäeva.
Küpsise teatis
See veebileht kasutab küpsiseid, et tagada parim võimalik kasutajakogemus.