CPU COOLER SAM5/SAM4/ALPINE 23 ACALP00035A ARCTIC
Arctic
Tootekood: ACALP00035A
Hind
8.20 €
Improved Cooling Performance by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity. Wide RPM Range The Alpine 23 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed. Lower Power Consumption & Minimum Vibration The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation. Easy and Tool-free Installation Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight. Technical Data Compatibility AMD Socket: AM4 Ram Clearance: unlimited Warranty: 6 Years Heatsink Outer Diameter: 93.4 mm Fin Material: Aluminum Number of Fins: 50 Y-shaped Fins Thermal Paste: MX-2 pre-applied Fan Fan Diameter: 90 mm Fan Speed: 100 - 2000 rpm Fan Bearing: Fluid Dynamic Bearing Noise Level: 0.3 Sone Current: 0.06 A Connector: 4-Pin Size & Weight Lenght: 98.6 mm Width: 121 mm Height: 65 mm Weight: 275.5
Täpsema info saamiseks võta ühendust klienditeenindusega e-maili või vestlusakna vahendusel.
Toode on ainult tellitav
Toodet ei ole hetkel esindustes saadaval.
Võimalik tellida:
Tellimine esindusse 5-12 tööpäeva.200 tk