xTool SafetyPro™ AP2 smoke canister
xTool SafetyPro™ AP2 Smoke Absorber
The xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.
Powerful, three-stage filtration
The xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.
Quiet operation for complete focus
With low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.
Sealed design and easy operation
The AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.
Mobility and compatibility
The xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.
Create in a healthy environment
With the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.
Included
P5010391 x1Filter set x1Pipe clamp x3Smoke exhaust pipe x1Screw set x1Power cable x1Pipe connector x2Wall connector x1Screwdrivers (Phillips and flathead) x2User manual x1
| Manufacturer | xTool |
|---|---|
| Model | P5010391 |
| Adapted machine | P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1 |
| Product size | 290*491*542mm |
| Product weight | 20.7 kg |
| Control mode | Touch button, four adjustable gears |
| Pre-filtration system | Cyclone separation |
| Rated power | 220W |
| Filter layers | SuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filter |
| Noise | 55dB |