Line-Interactive, 1200VA / 720W, 0.60, 170-280 VAC, 50Hz or 60Hz, 10ms, 45dB
- Topology: Line-Interactive
- UPS W: 720 W
- UPS VA: 1200 VA
Emergency power supply VI 1200 CSW line-interactive 1200VA 4x230V schuko USB-B 2xUSB charger
An excellent UPS designed to work with even the most demanding equipment. The elegant casing houses precise circuits. They are capable of producing a pure sine wave at the output and do not lose the efficiency of the power supply itself. Designed for convenient and intuitive operation, it has a built-in LCD display thanks to which even an inexperienced user can easily read the UPS status.
With the PowerWalker uninterruptible power supply, you don't have to worry about losing power in the network. Whenever there is a power outage, the UPS, thanks to specialized systems, will immediately change the operating mode to battery power, ensuring uninterrupted access to electricity. Switching the power source will be completely imperceptible, so you can work without any problems, and the only sign of lack of power will be an acoustic signal from the UPS.
A universal solution for everyone
The uninterruptible power supply is perfect for both the office and home. It will allow you to complete work, an internet meeting or watch your favorite movie whenever there is a power outage. If you ever need to replace the batteries in your device, simply remove the front cover, disconnect and remove the old batteries, and replace them with new ones.
Thanks to the use of an LCD display that optimizes the operation of the device, you can intuitively monitor the operation of the equipment. Clear markings will allow you to easily read information such as: voltage at the device's output, battery status or current operating mode.
Full sine wave
Each time the UPS enters battery backup mode, full sine wave alternating current is generated and used to maintain connected devices. This is a power source identical to that obtained from the mains, making it ideal for trouble-free operation of any device. The advantage of this solution is the ability to power even the most sensitive systems that need the most stable possible power source.
Thanks to a wide range of applications, the VI CSW series uninterruptible power supplies can be used both at home and in the office. At home, they will power the central heating furnace or enable the operation of the garage door, and in the office, they will power multifunctional devices and laser printers. Additional areas of application include: aquariums, monitoring and security systems and devices with electric motors.
Made in Line-Interactive technology
Thanks to the use of Line-Interactive technology supported by the AVR system, VI 1200 CSW is able to significantly improve the quality of the output voltage, thanks to which the connected device will operate without unnecessary interference. Using an autotransformer, AVR eliminates all voltage fluctuations in the range from 207 V to 243 V. Whenever this range is exceeded, the UPS will switch to battery power mode, maintaining continuity of power supply with the correct parameters. The short switching time of 6 ms ensures that even sensitive devices will not experience a sudden power outage. The risk of incorrect operation, turning off the device or even its permanent damage is completely eliminated.
Large number of ports
The UPS is equipped with 4 Schuko sockets. Each of them guarantees surge protection for the connected equipment, while protecting it against voltage spikes in the electrical network. Additionally, two sockets provide support for devices in the event of a power outage, allowing the equipment to operate uninterrupted.
Additionally, the UPS has been enriched with two RJ-45 ports (input/output) protecting against overvoltages on the Ethernet line, which could arise, for example, as a result of damage to the power installation, and as a result of which the connected device would be irreversibly damaged.
The USB-A ports (2.1 A) located on the front of the device can be successfully used to power and charge devices such as phones, power banks, or wireless headphones. In this way, we save ports on our computer, and we use a UPS charging station to replenish the batteries in our mobile equipment.
Support for USB HID
Extra control
If there is a need for even more precise configuration of the UPS or its constant monitoring, the manufacturer has provided dedicated software for the device called ViewPower. The software is available for every popular operating system in multiple languages and provides:
- Possibility to monitor multiple devices at once
- Power analysis charts, UPS data histories and its graph (voltage, frequency, load, battery charge)
- User notification via e-mail, SMS, sound
- Password access protection
- Remote access
- Possibility to set a turn-on and turn-off schedule, perform battery tests and check sockets