Powerwalker UPS VI 1500 CSW line-interactive 1200VA 4x230V schuko USB-B 2xUSB charger
- Topology: Line-Interactive
- UPS W: 900 W
- UPS VA: 1500 VA
VI 1500 CSW line-interactive 1200VA 4x230V schuko USB-B 2xUSB charger
An excellent UPS designed to handle even the most demanding equipment. The elegant casing conceals precision circuitry. They are capable of rendering a pure sine wave output without compromising the performance of the power supply itself. Designed for convenient and intuitive operation, it has a built-in LCD display so that even an inexperienced user can easily read the status of the UPS.
With a PowerWalker UPS, you don't have to worry about losing power on the mains. Whenever the power goes out, the UPS, thanks to its specialised circuitry, will instantly change to battery mode, ensuring uninterrupted access to electricity. The switchover will be completely imperceptible, as a result of which you can work uninterrupted and the only sign of a power failure will be an audible signal from the UPS.
A versatile solution for everyone
An uninterruptible power supply is perfect for both the office and the home. It allows you to finish your work, complete your internet meeting or watch your favourite film whenever the power goes out. If you ever need to replace the batteries in your device, all you have to do is remove the front of the casing, disconnect and remove the old batteries, and insert new ones in their place.
Thanks to the LCD display, which optimises the operation of the device, you can intuitively monitor the operation of the equipment. Clear markings will allow you to effortlessly read information such as the device's output voltage, battery status or current operating mode.
Full sine wave
Whenever the UPS enters battery backup mode, a full sine wave alternating current is generated, which is then used to back up the connected equipment. This is a power source identical to that received from the mains, making it ideal for the trouble-free operation of any device. The advantage of this solution is that it can power even the most sensitive systems that need the most stable power source possible.
Thanks to their wide range of applications, the VI CSW series uninterruptible power supplies will work well both at home and in the office. In the domestic space, they will maintain power to the central heating furnace or enable the operation of the garage door, while in the office they will power multifunctional devices and laser printers. Additional areas of application include aquaristics, monitoring and security systems or equipment with electric motors.
Line-Interactive technology
Thanks to the use of Line-Interactive technology supported by the AVR circuit, the VI 1500 CSW is able to significantly improve the quality of the output voltage so that the connected device will operate without unnecessary interference. Using an autotransformer, AVR eliminates any voltage fluctuations between 207 V and 243 V. Whenever this range is exceeded, the UPS will switch to battery mode, maintaining a continuous supply of power with the correct parameters. A short switching time of 6 ms will ensure that even sensitive equipment will not be affected by a sudden power failure. The risk of malfunctions, equipment shutdowns or even permanent damage is completely eliminated
Plenty of ports
The UPS is equipped with 4 Schuko sockets. Each guarantees surge protection for the connected equipment, protecting it from power surges. In addition, two sockets provide back-up for equipment in the event of a power failure, allowing equipment to operate uninterrupted.
In addition, the UPS is equipped with two RJ-45 (input/output) ports to protect against surges on the Ethernet line, which could occur, for example, due to damage to the power supply, and which would cause irreparable damage to the connected equipment.
The USB-A ports (2.1 A) on the front of the device can be successfully used to power and charge devices such as phones, powerbanks or wireless headphones. This saves ports on our computer and uses a charging station in the form of a UPS to top up the batteries in mobile equipment.
Support for USB HID
Additional control
If you need to configure the UPS even more precisely or to monitor it continuously, the manufacturer has provided dedicated software for the unit called ViewPower. The software is available for any popular operating system in multiple languages and provides:
- The ability to monitor multiple devices at once
- Power analysis graphs, UPS data history and its chart (voltage, frequency, load, battery charge)
- User notification via e-mail, sms, audio
- Password protection for access
- Remote access
- Possibility to set start-up and shut-down schedules, carry out battery tests and socket checks