Lanberg WAF1-5203-04-00S rack cabinet 3U Wall mounted rack Grey
19-inch hanging rack installation cabinet 4u+3u 540x200 low-profile (folded) gray
The WAF1 series low-profile 19" Rack cabinet is dedicated not only to low-current installations, but also to other applications, making it an ideal solution for many industries. In particular, it is perfect as a cabinet for CCTV installations, where you can accommodate a recorder, PoE switch, strip PDU and DIN rail devices. Our cabinet offers excellent organization, but also security for your equipment.
WAF1 wardrobe - ready for installation
Thanks to its compact dimensions, the wardrobe does not take up much space, which is important in limited spaces, and at the same time it does not attract excessive attention thanks to its discreet appearance. This is a solution that combines functionality, space saving and aesthetics.
Our wardrobe is delivered in one box, factory assembled and ready to use straight out of the box. You no longer have to worry about complicated assembly. The cabinet is equipped with four holes in the wall that allow it to be stably attached to the wall using wall plugs, which provides additional security and ensures that your IT equipment will be stored in perfect order. This is an ideal solution for those who value simplicity and functionality.
Small wardrobe, big possibilities
Our WAF1 cabinet is a guarantee of the safety of your equipment. It has two utility rails, 4U high and 3U deep, which enable devices to be mounted both vertically and horizontally. Thanks to this, you have complete freedom in the configuration and arrangement of your IT equipment, adapting the cabinet to your individual needs. This is an ideal solution for people who need flexibility in organizing their equipment.
Additionally, our cabinet is equipped with doors that open on both sides, which facilitate access to the interior and operation of devices. This is a practical solution that greatly facilitates the maintenance and management of IT equipment.
Vents
This ready-to-use WAF1 cabinet is not only an ergonomic and aesthetic solution, but also ensures adequate air circulation. There are ventilation holes in the top and bottom panels and in the side walls of the module that help maintain the appropriate temperature of your IT equipment.
Cable openings in the top and bottom panels
There are unscrewable cable holes in the upper and lower panels of the WAF1 cabinet, which allow for easy and convenient installation of the Lanberg brush panel. Thanks to this, you have complete freedom to adapt the wardrobe to your own needs and requirements.
These unscrewable cable openings also facilitate wire and cable management, helping to keep your IT equipment tidy.
Appropriate equipment
The interior of our wardrobe is equipped with a mesh board located on the back wall. Thanks to this solution, you can easily attach various elements to it using M4 screws, ensuring reliable attachment and organization of your equipment.
The set also includes a DIN rail, which allows you to mount and place devices or accessories on it according to your needs. Additionally, mounting anchors, a grounding cable and M6 screws guarantee not only the stability but also the safety of your equipment.
Convenience of use
The WAF1 cabinet has been designed for maximum comfort of use and flexibility. In its rear wall you will find 8 break-out holes that serve as passages, allowing you to adapt the interior of the cabinet to your individual needs. This is a solution that allows easy installation of cables, wires and accessories, without the need to dismantle the cabinet or drill new holes.
These punched holes in the back wall of the cabinet are a key element that ensures that your work will be effective and that your IT equipment will always be properly connected and organized. Whether you need bushings for Ethernet cables, power cords, or other types of cables, our cabinet allows you to adapt to your requirements.