Aerocool Designer-G-BK-v2 ARGB Midi-Tower, Tempered Glass - black
- Case form: ATX
- Midi-Tower for ATX, Micro-ATX, and Mini-ITX motherboards
- Tempered glass side panel and dust filter on the top and bottom
- Large mesh front for optimal airflow
- Graphics cards up to 345 mm, CPU coolers up to 158 mm
- Includes four 120 mm fans with ARGB LED lighting and a 7-port PWM ARGB fan hub
- Supports installation of up to eight fans
- Compatible with up to a 360 mm radiator
- I/O panel with 2x USB 2.0 and 1x USB 3.0, reset button, as well as 3.5mm audio and microphone jacks
Aerocool Designer-G-BK-v2: Stylish Midi-Tower with RGB lighting
The Aerocool Designer-G-BK-v2 comes with a minimalist design in the form of a Midi-Tower. The black front panel features a striking large mesh. The I/O panel on the top includes two USB 2.0 ports, a USB 3.0 port, and the reset button. A 3.5mm audio and microphone jack are also present. The large tempered glass side panel provides a view into the black interior of the steel chassis and the hardware installed inside.
Cooling with air and water
In the Aerocool Designer-G-BK-v2, up to eight case fans can be installed: three 120 mm fans are pre-installed in the front. Two optional 120 or 140 mm fans can be mounted in the top, and a 120 mm fan is already factory-installed at the rear of the case. Two additional 120 mm fans can also be optionally mounted on the PSU shroud. With the 7-port PWM ARGB fan hub, you can easily connect additional ARGB fans to your PC. Therefore, you don't have to worry about a lack of fan or RGB connectors on your motherboard.
Tower coolers must not exceed a height of 158 mm. There is also the option to install a water cooling system in the Midi-Tower. A 360 mm radiator can be installed at the front, and a 120 mm radiator at the rear if needed.
Ample space for cable management and drives
A total of four data storage devices can be installed simultaneously in the Aerocool Designer-G-BK-v2. The drive cage at the bottom of the case can accommodate two 3.5-inch drives or two 2.5-inch drives. Two additional 2.5-inch drives can be mounted on the back of the motherboard tray. Graphics cards up to 345 mm in length are supported. There is 24.5 mm of space for cable management, allowing your components to be neatly installed in the Aerocool Designer-G-BK-v2.
Specification
Dimensions: 195 x 448.5 x 399 mm (W x H x D)
Material: Steel, Plastic, Tempered Glass
Colour: Black
Form Factor: ATX, Micro-ATX, Mini-ITX
Total fan mounts:
Front: 3x 120 mm
Rear: 1x 120 mm
Top: 2x 120 mm or 2x 140 mm
PSU shroud: 2x 120 mm
Pre-installed fans:
3x 120 mm ARGB fans (Front)
1x 120 mm ARGB fan (Rear)
Fan Hub: 1x 7-port PWM ARGB fan hub
Radiator Support:
Front: 1x 120/240/360 mm
Rear: 1x 120 mm
Drive Bays:
2x 3.5/2.5 inches (internal)
2x 2.5 inches (internal)
PSU: 1x Standard ATX up to 166 mm (optional)
Expansion Slots: 7
I/O Panel:
2x USB 2.0 Type A
1x USB 3.0 Type A
1x 3.5mm Audio Jack
1x 3.5mm Microphone Jack
1x Reset button
Maximum GPU Length: 345 mm (without front fan)
Maximum CPU Cooler Height: 158 mm