HYTE Y70 Touch Infinite Midi Tower White
- CPU<: 180 mm
- GPU<: 42.2 cm
- Colour: White
- Case form: Midi Tower
Midi tower with an improved integrated 2.5K display including touch functionality
688 x 2,560 (2.5K) resolution and 60 Hz refresh rate
Side panel and front made of tempered glass
Fresh air intake at the bottom
Vertical graphics card mounting possible
PCIe 4.0 riser cable included
Radiators can be mounted on the side, top, or rear
Supports graphics cards up to 390 mm in length
Maximum CPU cooler height of 180 mm
Exceptional design and functionality
With the Hyte Y70 Touch Infinite, you enter entirely new territory when it comes to the look of your PC build. With its front and large three-part panoramic tempered glass window, the midi tower gives you an all-around view of your hardware instead of limiting the view to just one side. Built-in ventilation openings at the bottom and side of the case provide your hardware with an optimal supply of cool air.
It also leaves it up to you whether you prefer water cooling or air cooling for your components. Thanks to its exceptional layout, the Y70 is ideally prepared for both options.
The horizontal PCI slots are low profile. Alternatively, you can also mount your graphics card vertically using the included PCIe 4.0 riser cable to show it off to everyone.
Unique integrated display
The impressive 14.5-inch 2.5K 60 Hz capacitive touchscreen with a resolution of 688 x 2,560 pixels delivers a truly sharp and smooth visual experience. It also supports 10-point multitouch capability, opening up many possibilities. Thanks to the extensive display customization options via HYTE Nexus software, you can configure the screen according to your preferences. All of these features are integrated into your case, enabling stylish and practical interaction with your applications.
Compared to the regular Hyte Y70 Touch, the larger, brighter, and faster 2nd-generation panel also features a 33% tighter pixel pitch, 17% higher brightness, a 25% higher contrast ratio, and 50% faster pixel response time for an even better user experience. All in a single package integrated into the case structure, enabling meaningful digital interaction with an outstanding display in one case.
Good airflow through Cold Floor Cooling
The Hyte Y70 Touch Infinite has room for large, high-power components. That is why the case has a very open design and is built for unobstructed airflow. Thanks to the Cold Floor, fresh air is drawn in from below and transported unhindered into the interior of the case. There it reaches the most important and hottest components, such as the CPU and GPU, and provides very effective cooling. Thanks to the many fan mounting options, the warmed air is quickly and efficiently expelled from the case.
The bottom can accommodate either 3x 120 mm fans or 2x 140 mm fans. The top fits three 120 mm fans, the side fits three 120 mm or two 140 mm fans, and the rear supports 1x 120 mm or 1x 140 mm fan. Easy-to-clean dust filters are also installed on the top, bottom, and side to protect against dust.
Anyone planning to install water cooling will not be disappointed here either. On the side, there is enough room for a 280 mm or 360 mm radiator with a maximum height of 125 mm. Radiators up to 280 or 360 mm can be installed at the top of the case. The rear offers the option of using a 120 mm or 140 mm radiator, for example for small all-in-one water cooling systems.
Room for components and vertical GPU
The Y70 Touch Infinite offers the option to install E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards. This gives you a wide choice of platforms and configurations. In addition, it supports CPU coolers up to 180 mm in height and high-end graphics cards up to a maximum length of 390 mm. If you want to showcase your graphics card in the large window, you can also mount it vertically. The required riser cable is already included.
Because of its placement behind the motherboard, the power supply is separated from the rest of the case. This ensures that the waste heat from the power supply does not enter the main chamber of the case, where the other warm components are located, resulting in lower temperatures inside the case. Due to the orientation of the power supply, it draws in fresh air from the side rather than from the bottom. This helps prevent dust buildup and contributes to a longer lifespan for your power supply. For power-hungry hardware, optional ATX power supplies up to 235 mm in size (with cables) can be installed under the shroud.
Drive mounting options and I/O panel
The Y70 Touch Infinite offers enough mounting options for storage drives. You can install either two 3.5-inch or four 2.5-inch drives. This gives you enough storage for your games and applications.
The understated, aquarium-like design of the Y70 Touch Infinite also makes it possible to build subtle systems with good cooling performance. The side panel and front are made of tempered glass, allowing a clear view of the internal components. That means nothing stands in the way of an eye-catching RGB build either. The I/O panel does not let fans of portable storage down. It features a power button, reset button, 3.5 mm combined audio and microphone jack, two USB 3.0 Type-A ports, and one USB 3.1 Type-C port for faster file transfers. It is also angled toward you.
Technical Details
Drive Bays
Fan support
- 120 mm
- 1
- 2
- 140 mm
- 120