Jonsbo C6 mATX Case - Black
- CPU<: 75 mm
- GPU<: 25.5 cm
- Colour: Black
- Case form: Micro ATX
Extremely compact and stylish case for Micro-ATX motherboards
Front, top, and side panels with mesh for optimal airflow
Designed for vertical airflow with up to three possible fans
GPUs must be at least 200 mm and no more than 255 mm long
For ATX power supplies with up to 185 mm depth
Jonsbo C6: The versatile Micro-ATX case
With the C6, Jonsbo presents a compact, elegant, and versatile Micro-ATX case. It can easily accommodate current gaming hardware. For perfect air cooling, there's room for up to three 120 mm fans. Two of these can also be installed in the 140 mm format. Both the front and both side panels, as well as the top, are finely perforated to ensure good air exchange.
Gaming hardware: Optimally placed
In the Jonsbo C6, in addition to the Micro-ATX motherboard, you can fit a graphics card with a minimum length of 200 mm and a maximum of 255 mm. You can install either one HDD or two SSDs at the front if you forego a 120 mm fan. If you want to use a CPU cooler, it can be up to 75 mm high.
Thoughtfully designed and well-equipped
A standard ATX power supply is installed at the rear on the top and can be up to 185 mm deep. The I/O panel at the bottom right of the front features a USB 3.0 Type-C port, a USB 3.0 Type-A port, a combined 3.5 mm audio jack, and the usual power and reset buttons.
Technical Details
Connectivity
Drive Bays
Fan support
- 120
- 1