Jonsbo D41 MESH Screen ATX Case, Tempered Glass - Black
- CPU<: 168 mm
- GPU<: 40 cm
- Colour: Black
- Case form: Micro ATX
Compact and stylish case for ATX motherboards
Front mesh panel for optimal airflow, one side panel made of tempered glass
Designed for vertical airflow with up to eight possible fans
PSU can be vertically repositioned for longer graphics cards
GPUs can be at least 342 mm and up to 400 mm in length
Space for up to two 360 mm radiators at the same time
Equipped with an 8-inch display for showing system information
Includes Mini-HDMI to HDMI cable and USB-C to USB-A cable for the display
The Jonsbo D41 ATX Case
Jonsbo D41: The versatile Micro-ATX case
With the D41, Jonsbo presents a compact, elegant, and highly versatile Micro-ATX case from its Pine Cones series. It easily accommodates the latest gaming hardware. Whether you prefer air or water cooling, the Jonsbo D41 provides ample space for both. Depending on the size of your GPU and how many fans you need, you can position the power supply at the front as you like.
The Jonsbo D41 ATX Case
Available in various versions – the choice is yours
The Jonsbo D41 is available in different versions: with or without mesh, and even with a large display on the front where you can show system information or animated screensavers. No matter your preference, the Jonsbo D41 allows you to realize your perfect gaming setup. This black version features a mesh front and display, optimized for plenty of airflow.
Personalize your Jonsbo D31
This variant of the Jonsbo D31 features a front-mounted 8-inch TFT-LC display. At 1,280 x 800 pixels, you can use software such as AIDA to display system information or animated screensavers. The software must be purchased separately. The display is protected by a sheet of tempered glass. You can also replace the display with the standard front panel included with the case and place it separately on your gaming desk. The display connects via a Mini-HDMI port. Side switches let you turn the screen on/off and adjust the brightness.
The Jonsbo D41 ATX Case
Showcase your high-end gaming hardware
The interior of the Jonsbo D41 is clearly visible through the tempered glass side panel. In addition to an ATX motherboard, it fits a graphics card with a length of at least 330 mm and up to 400 mm. The PSU can be positioned behind a cover and shifted vertically in four steps by up to 140 mm. There is space for two SSDs behind the motherboard tray. There is also plenty of room for cable management. One HDD can be installed at the front bottom, sacrificing a third fan in the process.
The Jonsbo D41 ATX Case
Plenty of space for fans…
The three possible 120 mm fans on the floor above a dust filter are offset, so that the incoming air passes by the graphics card. Alternatively, you can use two 140 mm fans here. At the top, you can install up to three 120 mm or two 140 mm fans to exhaust warm air through the fine mesh grille. There is also space for one more 120 mm fan at both the rear and the front.
The Jonsbo D41 ATX Case
... and radiators
At the bottom and on the top, radiators of up to 360 mm can be installed instead. The top also has room for a 280 mm radiator. If you want to use a CPU cooler, it can be up to 168 mm tall. The I/O panel, located at the lower right of the front panel, offers one USB 3.1 Type-C port, one USB 3.0 Type-A port, a combined 3.5 mm audio jack, and the usual power/reset switches.
Technical Details
- Steel
- Karastatud klaas
Drive Bays
Fan support
- 1
- 120 mm
- 120
- 1
- 120 mm
- 120