Kolink Citadel Mesh Micro-ATX Case - Black with Tempered Glass
- CPU<: 190 mm
- GPU<: 34.5 cm
- Colour: Black
- Case form: Micro ATX
The Kolink Citadel Mesh Micro-ATX case is suitable for those who want a compact gaming case with extensive airflow. With its large mesh front and the two pre-installed 120 mm PWM fans behind it, the Micro-ATX case skillfully combines an attractive design with impressive performance. The tempered glass side door allows hardware components to be put fully on display - the perfect case for perfect gaming setups.
The features of the Kolink Citadel Mesh at a glance:
Large mesh front with two pre-installed 120 mm PWM fans in black
Tempered glass side door for an unobstructed view of the interior
Suitable for Micro-ATX and Mini-ITX motherboards
Vertical installation of a 2.5-slot graphics card possible (riser card sold separately)
Installation of a 280 mm radiator at the front and a 240 mm radiator on the top possible
I/O panel with two USB 3.0 ports, one USB 2.0 port, and HD audio
Space for graphics cards up to 345 mm, CPU coolers up to 190 mm, and power supplies up to 200 mm
Kolink Citadel Mesh: Optimized airflow meets strong performance
The Kolink Citadel Mesh comes with two 120 mm PWM fans mounted at the front. The fans offer good performance, are quiet at the same time, and can be connected to 4-pin fan headers on the motherboard. The motherboard then automatically controls the speed via PWM. The front consists of a large mesh panel and makes a decisive contribution to the good airflow inside the case.
The two pre-installed 120 mm fans can be replaced with two larger 140 mm fans. In addition, two 140 or 120 mm fans can be mounted on the top and another 120 mm fan at the rear. Those who prefer water cooling can mount a radiator up to 280 mm at the front, and a 240 mm radiator can also be installed on the top. On the top there is a magnetic dust filter over the honeycomb-pattern mesh. The installed hardware can be admired through the easy-to-open tempered glass side door. Magnets keep the door closed.
The perfect case for enthusiasts
The interior is completely finished in black, and the PSU shroud contributes to a tidy look. In the drive cage under the PSU shroud, there is space for two 3.5-inch or two 2.5-inch drives. Two additional 2.5-inch drives can be mounted on the motherboard tray next to the motherboard. The motherboard tray and the PSU shroud offer numerous openings for cables, and behind the motherboard tray there is a generous 24 millimeters of space for cable management. The optional ATX power supply, up to 200 millimeters long, is installed above a removable dust filter.
Graphics cards up to 345 millimeters in length fit in the Micro-ATX case; with a radiator installed at the front, the permitted length is reduced to 320 millimeters. CPU coolers may be up to 190 millimeters tall. The I/O panel at the front of the top panel includes two USB 3.0 Type-A ports, one USB 2.0 port, and audio connectors.
Technical Details
Connectivity
Drive Bays
Fan support
- 1
- 2
- 120