Lian Li O11 Dynamic Mini + Mini Riser Card - PCIe 4.0, Black
- CPU<: 170 mm
- GPU<: 395 mm
- Case form: ATX
Modular Midi-Tower in black, with front and side panels made of tempered glass, side and top made of aluminum, for up to 9 fans, 2x 3.5/2.5 inch and 2x 2.5 inch, 1x USB 3.1 Type C / 2x USB 3.0 Type A.
- 4 DRIVE CAPACITY
- ADEQUATE AIRFLOW
- DUST MANAGEMENT
- OPTIONAL VERTICAL GPU BACK PANEL
- MODULAR BACK PANEL
- MODULAR PUMP STAND
- ALUMINUM MATERIAL
- DUAL CHAMBER DESIGN
CONFIGURATION OF YOUR CHOICE MODULAR BACK PANEL
Decide how many expansion slots you need. Calculate the size of your fans & accessories.
Pick your motherboard type. 3 kinds of back panels to meet your demand!
5 slot
7 slot
3 slot
SIDE RADIATOR CONFIGURATION WITH LONG GPU
The 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator and leaves enough space to install long GPUs in this compact case.
WITH WATER COOLING IN MIND MODULAR PUMP STAND
Friendly to custom water cooling users, the three different pump stands included can accommodate different scenarios.
FLAT PUMP STAND
IDEAL FOR MOUNTING THE PUMP DIRECTY AT THE BOTTOM OF THE CASE.
ELEVATED PUMP STAND
MOUNTING THE PUMP NEXT TO THE 240/280MM RADIATOR. EASILY MATCH INTERFACE.
FLOATING PUMP STAND
MOUNTING ABOVE A 120MM FAN ON A RADIATOR. EASILY MATCH INTERFACE.
THE POWER BUTTON FINE GROOVES ARE GREAT TO THE TOUCH.
A SERIES OF O11 DYNAMIC
As a member of the O11 family, the O11D Mini is designed to support a maximum number of radiators to optimize the water-cooling potential, and this even with a smaller frame.
O11D MINI
DUAL-CHAMBER DESIGN FOR CABLE MANAGEMENT
Carried from the design of the O11D series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points and Velcro strap channels are provided to tidy up the cables while the SSD mounting bar helps keep the loose cables all snuggled up to ensure a clean look and prevent the right-side panel from not closing or bulging.
SECOND CHAMBER WITH 4 DRIVES CAPACITY
SSD Mounting Bar
2 x 2.5” SSD can be positioned at the front or back of the bar.
Drive Caddy
Optimized storage space for 2 x 3.5” HDD or 2 x 2.5” SSD
COMPLETE DUST PROTECTION
All 3 ventilation intake sides are equipped with magnetic dust filters and a removable dust tray to prevent the dust from entering the case.
O11D MINI VERTICAL GPU KITS
The vertical GPU enabled back panel can be adjusted up and down for clearance of the fans and radiator at the bottom of the case.
| DIMENSIONS | (D) 420mm × (W) 269.5mm × (H) 380mm |
|---|---|
| MOTHERBOARD | E-ATX (Max 280 mm wide) / ATX / Micro-ATX / Mini-ITX |
| PSU | SFX / SFX-L |
| MATERIAL | Steel 4 mm Tempered Glass 2 mm Aluminum (top and left panel) |
| FAN SUPPORT |
Top: 3 × 120mm or 2 × 140mm Side: 2 × 120mm or 2 × 140mm Bottom: 3 × 120mm or 2 × 140mm Rear: 1 × 120mm |
| RADIATOR SUPPORT |
Top: 360mm or 280mm or 240mm or can’t mount Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator |
| GPU LENGTH CLEARANCE | 395mm |
| CPU COOLER HEIGHT CLEARANCE | 170mm |
| VGA Length | 370mm |
| DRIVES | Right side 2 × 2.5" SSD + back plate 2 × 3.5" HDD (or SSD) |
| EXPANSION SLOTS | 3 or 5 or 7 slots (depends on back panel) |
| IO PORTS | 2 × USB 3.0, 1 × USB 3.1 TYPE-C, 1 × HD Audio, Power Button |
| DUST FILTERS | 1 × Top, 1 × Bottom, 2 × Side |