Lian Li Vector V150 INF mATX case, tempered glass - black
The Lian Li Vector V150 is aimed at anyone who wants to build a compact system without giving up powerful hardware and a premium look. The tempered glass front combines an infinity mirror with two integrated 140 mm fans. Inside, the case offers plenty of room for large components, multiple drives, and extensive cooling. A pre-installed RGB and fan hub also helps you keep lighting and fan control neatly organized.
Compact mATX format: For space-saving builds
Infinity mirror front: Tempered glass with 2x integrated 140 mm fans
Motherboard support: Compatible with Mini-ITX and Micro-ATX
Plenty of room for graphics cards: 5 PCIe slots and up to 400 mm GPU clearance
Powerful cooling: Up to ten fans and radiator support up to 360 mm
The Lian Li Vector V150: Compactly built, made for large components
The Vector V150 supports Mini-ITX and Micro-ATX motherboards and offers enough room for high-performance components. For air cooling, CPU coolers up to 163.5 mm in height are supported. Thanks to 5 PCIe slots and up to 400 mm of space for graphics cards, you can also install large GPUs.
Clean cable management for a tidy build
For a clean interior, there are thoughtfully placed cable pass-throughs, multiple mounting points, and Velcro straps. This allows the cabling to be neatly bundled and kept organized over the long term.
You also have flexibility when it comes to drives. In the PSU chamber, a drive cage can be used depending on the PSU length. With a 150 mm PSU, it can accommodate 2x 2.5-inch SSDs or 1x 2.5-inch SSD + 1x 3.5-inch HDD. In addition, there are mounts for three more SSDs.
Pre-installed RGB and fan hub
An RGB and fan controller is already installed in the case. It brings lighting and fans together in one place, making the build and cable routing clearer and more organized.
If you connect the hub to the motherboard, you can control the RGB lighting via compatible motherboard software. Alternatively, the hub can be switched to a wireless mode that can be used with a Lian Li L-Wireless Controller (sold separately) and L-Connect 3.
Cooling like a wind tunnel: Many fans, clear airflow
3 fans pre-installed: 2x 140 mm at the front (integrated) + 1x 120 mm at the rear
Up to 10 fans in total: Room for up to seven additional fans
Top: 2x 140 mm or 3x 120 mm
PSU chamber top: 2x 120 mm possible
Cooling your components is one of the major advantages of the Vector V150. Three fans are already installed at the factory: two 140 mm fans in the front and one 120 mm fan at the rear.
There is room in the top for 2x 140 mm or 3x 120 mm. An additional 2x 120 mm can be mounted on top of the PSU chamber. If you remove the side drive bracket, additional mounting points for 2x 120 mm are created there. This allows for up to ten fans in total.
Radiator support for AiO liquid cooling
If you want to use an AiO, the Vector V150 case is perfectly prepared for it: there is room in the top for a 280 mm or 360 mm radiator. This lets you tailor the number of fans and radiators to match the installed hardware and your desired noise profile.
In addition, the case uses an airflow design that cools the graphics card in particular. There is an angled panel in the PSU chamber that directs the fresh air from the front fans specifically toward the GPU. The air then rises upward through the remaining components—ensuring stable temperatures, especially with high-performance graphics cards.
Infinity mirror front made of tempered glass
The tempered glass front is equipped with a large infinity mirror and also integrates the two 140 mm fans. Together with the glass side panel, you get a clear view of your hardware and the RGB lighting.