Montech HS01 PC case, midi-tower, ATX, aRGB, tempered glass, black
- CPU<: 175 mm
- GPU<: 42 cm
- Colour: Black
- Case form: ATX
Seamless cable management with ATX motherboards and back-connect
Optimal cooling with up to 11x 120mm fans and a 360mm radiator
Rotatable design allows the case to be positioned on the left or right of your setup
Elegant aRGB lighting, compatible with common motherboards
Space for GPUs up to 420mm long, with vertical mounting options
The Montech HS01 PC Case: Subtle RGB lighting with advanced mounting options
The Montech HS01 midi-tower is a subtle PC case that scores points with stylish aRGB lighting and especially versatile mounting options. With the necessary cutouts for back-connect motherboards, such as those from MSI’s Project Zero series or ASUS’s BTF series, the case allows for a build with nearly invisible cables. Thanks to the cables being tucked away at the rear, you’ll save both time and hassle.
Optimal cooling with multiple fans and large radiators
Eleven 120mm fans and several installable radiators ensure optimal cooling for your hardware in the Montech HS01. Whether a custom loop, 360mm AiO, or conventional air cooler—this case lets you design your cooling system just the way you want.
Elegant lighting and rotatable design
With integrated aRGB lighting compatible with common motherboards, the case really stands out in your setup. The illuminated strip extends from the front across the entire side, enhancing your setup with vibrant lighting, no matter if the case is positioned upright or upside down.
The tower’s design allows your build to be positioned normally or upside down. This also enables you to place your PC on the left side of your setup without seeing the back of the case. This is made possible, among other things, because the power supply is installed at the top right to make connecting your motherboard via back-connect easier.
Plenty of space for powerful hardware
Thanks to the spacious interior of the Montech HS01, even heavy-duty high-end builds will easily fit inside. With a maximum graphics card length of 420mm, modern high-end GPUs with triple-slot designs fit comfortably and smoothly in this case. With the many fans providing plenty of airflow, your graphics card will always be optimally cooled with fresh air.
You can even decide whether to install the graphics card vertically or in the conventional horizontal way. No additional accessories, such as a bracket, are required for vertical mounting. Besides a sufficiently long PCIe riser cable, you only need a bit of time and a screwdriver to install your graphics card in the desired orientation.
Practical front I/O and storage options
The practical front I/O of the Montech HS01 consists of two USB 3.0 Type-A ports, a USB Type-C port, and two jacks for a microphone and a pair of headphones. When it comes to storage, the Montech case doesn’t hold back either. Two 3.5-inch hard drives can be accommodated along with four 2.5-inch drives, ensuring as much storage capacity as possible for your build.
Technical Details
Connectivity
Drive Bays
Fan support
- 120
- 2
- 120
- 140 mm
- 3