Montech KING 95 PRO Midi-Tower Case, Tempered Glass, ARGB - Black
- CPU<: 175 mm
- GPU<: 42 cm
- Colour: Black
- Case form: Midi Tower
Midi-tower with tempered glass front and side panels
Top panel and right side panel feature ventilation slots for excellent airflow
Dual-chamber design for up to two PSUs and 35 mm for cable management
Supports motherboards up to ATX and GPUs up to 420 mm in length
Six ARGB PWM fans pre-installed, up to nine possible in total
Supports up to three radiators, room for up to eight drives
Includes a PWM/ARGB hub
The Montech KING 95 PRO Midi-Tower
The Montech KING 95 PRO Midi-Tower: The optimal entry point for your gaming setup
The Montech KING 95 PRO Midi-Tower is the ideal foundation for your custom-built gaming PC with high-end hardware. The case comes equipped from the factory with advanced air cooling, allowing you to focus on installing your preferred gaming hardware. It is also highly expandable, allowing you to turn it into your personalized gaming setup. In addition, its design looks amazing, especially thanks to the seamlessly connected front and side panels made of tempered glass.
The Montech KING 95 PRO Midi-Tower
Well cooled right out of the box
The six pre-installed fans provide abundant airflow inside the case, further enhanced by the large air intakes with dust filters integrated on the left side panel and the top. On the side, two 140 mm ARGB PWM fans with reversed blades are installed, which can be replaced by two 120 mm fans. Under the top panel, there is room for three 120 mm or two 140 mm fans. One additional 120 mm ARGB PWM fan comes pre-installed at the rear. Three more 120 mm ARGB PWM fans with reversed blades are mounted at the bottom and can be replaced by two 140 mm fans. These fans can help cool the graphics card. The CPU can be equipped with a cooler up to 175 mm in height.
The Montech KING 95 PRO Midi-Tower
Space for two power supplies and plenty of drives
The Montech KING 95 PRO offers ample space for advanced gaming hardware. It supports motherboards up to ATX form factor. Graphics cards attached to it can be up to 420 mm long. Up to two power supplies can fit in the second chamber behind the motherboard tray. There is 35 mm of space for cable management. There is also a drive cage for either two HDDs or three SSDs. Two more SSDs can be mounted on the back of the motherboard tray. At the bottom, you can install three HDDs or SSDs instead of fans.
On the side-mounted I/O panel in front of the second chamber, you'll find a USB-C port, two USB 3.0 ports, a 3.5 mm jack for microphone and headphones, as well as a switch to control the lighting. The cover of the second chamber is framed by an ARGB strip. This PRO version of the Montech KING 95 includes a hub for controlling lighting and fan speed.
Technical Details
- Karastatud klaas
- SPCC
Connectivity
Drive Bays
Fan support
- 1
- 2
- 120 mm