Montech X3 Mesh Midi-Tower, RGB, Tempered Glass - White
- CPU<: 160 mm
- GPU<: 30.5 cm
- Colour: White
- Case form: Midi Tower
Midi-Tower with mesh front panel
Supports motherboards up to ATX and GPUs up to 305 mm in length
Three 140 mm and three 120 mm fans pre-installed, up to eight fans possible in total
Space for up to four drives
Tempered glass side panel on hinges
The Montech X3 Midi-Tower
The Montech X3 Mesh Midi-Tower: The perfect entry-level case for your gaming setup
The Montech X3 Mesh Midi-Tower is the ideal foundation for your custom-built gaming PC. This PC case comes equipped from the factory with comprehensive air cooling, allowing you to focus on installing your preferred gaming hardware. It is also expandable, so you can transform it into your own personalized gaming setup. On top of that, it looks fantastic, not least thanks to the tempered glass side panel with hinges.
The Montech X3 Midi-Tower
Well cooled out of the box
The six pre-installed fans provide ample airflow inside the case, further enhanced by the mesh panel on the front. Three 140 mm fans are installed in the front, with two additional 120 mm fans under the top panel, and a third 120 mm fan at the rear. Two more 120 mm fans can be installed on top of the PSU shroud, where they can help cool the graphics card. The CPU cooler can be up to 160 mm in height.
The Montech X3 Midi-Tower
The Montech X3 Mesh offers plenty of space for advanced gaming hardware. It supports motherboards up to ATX form factor. Attached graphics cards can be up to 305 mm long. The PSU shroud accommodates power supplies up to 160 mm in length and includes a drive cage where you can install two HDDs or SSDs. Two additional SSDs can be mounted behind the motherboard tray.
The side-mounted I/O panel on the top features a USB-A 3.0 port, two USB 2.0 ports, and a 3.5 mm jack each for microphone and headphones, as well as a switch to turn the pre-configured lighting on and off.
Technical Details
Connectivity
Drive Bays
Fan support
- 1
- 120
- 120
- 140 mm
- 3