Phobya Y-cable for PWM splitter 4Pin PWM to 4Pin PWM & 4Pin Molex - Black 50cm
Phobya Y-cable for PWM splitter 4Pin PWM to 4Pin PWM & 4Pin Molex.
Since controlling and switching PWM fans via the mainboard is much more cost-effective than using a fan controller, this cable is ideal. This cable can be used to increase the small number of mainboard slots for this type of fan. Alternatively, the 4-pin Molex can be used to supply power to the two PWM fans.
The adapter is supplied in a simple black. The cables are shielded with a matching sheath made of flex sleeves. It offers additional protection against abrasion. This increases the service life of the cables considerably. The ends near the connectors have been provided with shrink tubing to create a clean transition.
Sleeve:
This cable is not only practical, but also very visually appealing. The mesh that wraps around the actual cable is very dense and offers exactly the effect that professional sleevers want: complete conversion of the cable to emphasize the uniqueness of their system even better! Particular attention was paid to the combination of the cable sheath (the sleeve), the connector and the shrink tubing so that they create a uniform image.
Sets:
Phobya's goal is to accommodate hobby and professional case modders a little. Sleeving is a lot of work and takes a lot of time, so with Phobya's cables you can now rebuild your entire system the way you want, just by changing the cable.
Technical details:
- Connections:
- 2x 4 PIN PWM female connector
- 1x 4Pin Molex connector
- Colour: black sleeve, black connectors, black shrink tube
- Dimensions: complete 50cm
- RoHS compliant
Scope of delivery:
- 1x Phobya Y-cable for PWM splitter 4Pin PWM to 4Pin PWM & 4Pin Molex 50cm - black