thermal pad 1.5mm (120x20mm) for ramplex, innovatek, Mips, Koolance
- Dimensions: 120x20 mm
- Height: 1.5
This thermal padd is very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled.
Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads were specially produced for RAM cooling but can also be cut to any desired size.
Technical data:
Dimensions: 120x20x1,5mm
Heat conductivity: 1,5 W/mK
Maximum bridgeable gap: 1,5mm
Electrically non-conductive
Extent of delivery:
1x Self-adhesive thermal pad 1,5mm (120x20mm) for ramplex, innovatek, Mips and Koolance
Note: The thermal pads can be compressed to up to half of their height.