Lian Li UNI FAN SL-INF 120 ARGB PWM Fan - 120mm, White
Product code: UF-SLIN120-1W
- Fan diameter: 120 mm
- Fan connector: 4-pin
Price
25.60 €
- Single 120mm PWM ARGB fan with mirror effect
- Second generation fan technology with 10% performance boost
- Maximum of 61.3 CFM airflow and 2.66 mmH2O air pressure
- 40 ARGB LEDs on the frame and central hub
- New 7-pin adapter for power and lighting
- Improved daisy chain and cable management features
Second-Gen Performance
Level up your airflow with the Lian Li UNI FAN SL-INF 120 series of PWM fans. This 120 mm fan utilizes second-generation cooling technology, offering a 10% performance increase over the previous SL120 model. Additionally, each fan features 40 ARGB LEDs embedded in the frame and central hub, along with a mirror effect. With no compromise on thermal capacity or lighting brightness, the SL-INF 120 is an excellent addition to your gaming PC.The Lian Li UNI FAN SL-INF 120 uses second-generation cooling technology for a 10% performance boost over the previous SL120 model. Its seven-blade fan design is optimized for higher speeds, increased airflow, and greater static air pressure, all while keeping noise levels low. At maximum speed, the SL-INF 120 produces only 29 dBA. With a maximum static pressure of 2.66 mmH2O and airflow of 61.3 CFM, this fan keeps your gaming PC cool and efficient.
As PWM fans, their speed can be adjusted to suit your workload. Thanks to the L-Connect 3 software, you can enable Start/Stop mode—when the CPU or GPU drops below 50 °C, the fans stop completely. When running, speeds are adjustable between 200 RPM and 2,100 RPM, giving you total control.
ARGB Lighting
Each Lian Li UNI FAN SL-INF 120 is equipped with 40 ARGB LEDs set into the frame and central hub. To maximize brightness, these LEDs are paired with an infinity mirror to create a striking lighting effect. The layered infinity mirror, with 0.5 mm gaps, adds definition visible from any angle. The 3D effect and geometric frame design create a bold aesthetic for any gaming PC, while the aluminum trim reflects light to both edges and sides of the frame.Improved Features
Where previous Lian Li ARGB PWM fans required separate cables for lighting and power, the Lian Li UNI FAN SL-INF 120 uses a single cable with a 7-pin connector supplying both power and lighting. This attaches to the new UNI HUB, included with SL-INF 120 triple packs. The single pack includes a split cable with both a 4-pin PWM and 3-pin ARGB header for direct motherboard connectivity.The daisy-chain feature has also been improved. The Lian Li UNI FAN SL-INF 120’s connector key that slides into the frame of a second fan can be easily removed—simply twist it 90° and pull it from the frame. This increases compatibility with radiators and eliminates protruding parts for a cleaner look. The key can be reinstalled just as easily if needed.
Additionally, the Lian Li UNI FAN SL-INF 120 features improved cable management. The cable module is smaller than on previous models and is now located centrally on the fan frame’s edge. It can also be oriented in multiple ways to optimize cable efficiency based on your build.
UNI HUB and L-Connect 3
Included with triple packs, the UNI HUB controller is optimized for cohesive support. It features two 3-pin ARGB SM ports designed to support other Lian Li ARGB devices, such as Galahad AiO pump LEDs, in addition to four ports for up to sixteen UNI FANs, in four clusters of four.Lighting and fan control can be handled through Lian Li’s updated L-Connect 3 software or your motherboard software for single fans. Each cluster can be assigned a fan speed or set to specific modes. For lighting, there are over 30 adjustable effects and support for the full 16.8 million color spectrum. Effects can be assigned to the fan’s center only, edge only, or both for layered lighting. With such flexibility, the Lian Li UNI FAN SL-INF 120 delivers stunning light shows.
Technical Details:
- Dimensions: 120 x 122.1 x 25 mm (W x H x D)
- Materials: PBT, Aluminum
- Color: White
- Fan:
Bearing Type: Fluid Dynamic Bearing
Fan Speed: 200 - 2,100 RPM
Acoustic Noise: max 29 dB(A)
Airflow: max 61.3 CFM (104.14 m³/h)
Air Pressure: max 2.66 mmH2O
Operational Voltage: 12 V
Start Voltage: 6 V
Input Current: 0.18 A
Input Power: 5.16 W - Lighting:
Type: Digitally addressable RGB
Number of LEDs: 40
Input Current: 0.6 A - Connection: 7-pin combined PWM ARGB
- Controller Connections:
4x 7-pin combined ARGB and PWM
2x 3-pin SM JST for ARGB components
2x SATA (max. input 29 watts)
1x 9-pin USB for connection to a 9-pin motherboard header
3-pin 5V ARGB and 4-pin PWM for motherboard connection - Warranty: 2 years
For more detailed information, please contact customer service via email or the chat window.
Technical details
Dimensions120x120x25
Diameter120 mm
Speed2100 rpm
Noise29 dB
Air pressure2.66 mmH2O
Connector4-pin
IlluminationFikseeritud värvid
ColourWhite
Warranty (months)24
Product can only be ordered
Product is not currently available in stores.
Fast shipping
Available to order:
Ordering to a store 1-4 working days.100 pcs