Lian Li UNI FAN SL-INF 120 ARGB PWM 3-Pack with Controller
Product code: G99.12SLIN3B.00
- Fan diameter: 120 mm
Price
83.85 €
Monthly payment
7.00 € / starting from monthly
- 120mm PWM ARGB fan with mirror effect, triple pack
- L-Connect 3.0 controller included
- Second generation fan technology with 10% performance increase
- Maximum airflow of 61.3 CFM and 2.66 mmH2O air pressure
- 40 ARGB LEDs on the frame and central hub
- New 7-pin adapter for power and lighting
- Enhanced daisy chain and cable management features
Second-Gen Performance
Take your airflow to the next level with the Lian Li UNI FAN SL-INF 120 series of PWM fans. This 120 mm fan uses second-generation cooling technology, delivering 10% better performance compared to the previous SL120 model. In addition, each fan features 40 ARGB LEDs embedded in the frame and central hub, combined with a mirror effect. With no compromise on thermal capacity or lighting brightness, the SL-INF 120 makes a great addition to any gaming PC.The Lian Li UNI FAN SL-INF 120 uses second-generation cooling technology to deliver a 10% performance boost over the previous SL120 model. Its seven-blade design is optimized for higher speeds, greater airflow, and increased static pressure, all while reducing noise. At maximum speed, the SL-INF 120 only reaches 29 dBA. With a maximum static pressure of 2.66 mmH2O and airflow of 61.3 CFM, this fan will keep your gaming PC cool and efficient.
As PWM fans, their operational speed can be adjusted to fit your workload. With the L-Connect 3 software, you can activate the Start/Stop mode — when your CPU or GPU drops below 50 °C, the fans stop completely. Fan speeds can be adjusted between 200 RPM and 2,100 RPM, giving you exceptional control.
ARGB Lighting
Each Lian Li UNI FAN SL-INF 120 comes with 40 ARGB LEDs placed in the frame and hub. These, paired with an infinity mirror, create a stunning lighting effect. The infinity mirror features 0.5 mm breaks for added definition from any angle. Combined with a geometric frame and 3D lighting effects, this results in a bold look that suits any gaming PC. The aluminium trim further accentuates the light, making the effect visible along both the edges and the sides.Improved Features
Previously, Lian Li ARGB PWM fans required separate cables for lighting and power. The Lian Li UNI FAN SL-INF 120 innovates with a single cable and a 7-pin connector providing both power and lighting. This connects to the new UNI HUB, included with the SL-INF 120 triple packs. Single fan packs include a split cable with both a 4-pin PWM and 3-pin ARGB header, which can connect directly to the motherboard.The daisy-chaining feature is also improved. The Lian Li UNI FAN SL-INF 120's connector key, which slots into another fan’s frame, is now easily removable—simply twist 90 ° and pull it out. This increases the SL-INF 120's compatibility with radiators and results in a cleaner look. When needed, the key can easily be reinstalled.
Additionally, the Lian Li UNI FAN SL-INF 120 offers better cable management. The cable module is smaller than on previous models and is now centrally located on the fan frame edge. It can also be oriented in various ways for optimal cable efficiency based on your setup.
UNI HUB and L-Connect 3
The UNI HUB controller, included in triple packs, has been optimized for smooth operation. This hub features two 3-pin ARGB SM ports, allowing support for other Lian Li ARGB devices like the LEDs on the Galahad AiO pump, in addition to four ports for up to sixteen UNI FANs in four clusters of four.Lighting and fan control are easy with Lian Li's updated L-Connect 3 software or through your motherboard software for single fans. Each fan cluster can be individually set to specific speeds or modes. For lighting, there are more than 30 effects and support for the full 16.8 million color spectrum. Lighting effects can be assigned to either the fan's center, edge, or both. With such flexible options, the Lian Li UNI FAN SL-INF 120 can create incredible lighting displays.
Technical Details:
- Dimensions: 120 x 122.1 x 25 mm (W x H x D)
- Materials: PBT, Aluminium
- Colour: Black
- Fan:
Bearing Type: Fluid Dynamic Bearing
Fan Speed: 200 - 2,100 RPM
Acoustic Noise: max 29 dB(A)
Airflow: max 61.3 CFM (104.14 m³/h)
Air Pressure: max 2.66 mmH2O
Operational Voltage: 12 V
Start Voltage: 6 V
Input Current: 0.18 A
Input Power: 5.16 W - Lighting:
Type: digitally addressable RGB
Number of LEDs: 40
Input Current: 0.6 A - Connection: 7-pin combined PWM ARGB
- Controller Connections:
4x 7-pin combined ARGB and PWM
2x 3-pin SM JST for ARGB components
2x SATA (max input 29 watts)
1x 9-pin USB to connect to a 9-pin header on the motherboard
3-pin 5V ARGB and 4-pin PWM to connect to motherboard - Warranty: 2 years
For more detailed information, please contact customer service via email or the chat window.
Technical details
Dimensions120x120x25
Diameter120 mm
Noise29 dB
ColourBlack
Warranty (months)24
Number of fans3
Product can only be ordered
Product is not currently available in stores.
Fast shipping
Available to order:
Ordering to a store 1-4 working days.100 pcs