Lian Li UNI FAN SL-INF 120 ARGB PWM Fan 3-Pack with Controller - 120mm, White
Product code: G99.12SLIN3W.00
- Fan diameter: 120 mm
Price
83.95 €
Monthly payment
7.00 € / starting from monthly
- 120mm PWM ARGB fan with mirror effect in a triple-pack
- L-Connect 3.0 controller included
- Second generation fan technology with 10% performance boost
- Maximum of 61.3 CFM airflow and 2.66 mmH2O air pressure
- 40 ARGB LEDs on the frame and central hub
- New 7-pin adapter for power and lighting
- Improved daisy chain and cable management features
Second-Gen Performance
Level up your airflow with the Lian Li UNI FAN SL-INF 120 series of PWM fans. This 120 mm fan utilizes second-generation cooling technology, offering a 10% performance boost over the previous SL120 model. Additionally, each fan has 40 ARGB LEDs embedded in the frame and central hub, combined with a mirror effect. With no compromise on thermal performance or lighting brightness, the SL-INF 120 is an excellent addition to your gaming PC.The Lian Li UNI FAN SL-INF 120 utilizes second-generation cooling technology for a 10% performance increase over the previous SL120 model. Its seven-blade fan design has been optimized for higher speeds, increased airflow and static pressure, as well as quieter operation. At maximum speed, the SL-INF 120 produces only 29 dBA of noise. With a maximum static pressure of 2.66 mmH2O and airflow of 61.3 CFM, this fan efficiently cools your gaming PC.
Additionally, as PWM fans, the operating speed can be adjusted to match your workload. Thanks to the L-Connect 3 software, you can take advantage of the Start/Stop mode: if the CPU or GPU is running below 50 °C, the fans stop completely. When in use, speeds can be adjusted from 200 RPM to 2,100 RPM, giving you complete control.
ARGB Lighting
Each Lian Li UNI FAN SL-INF 120 is equipped with 40 ARGB LEDs located in the frame and central hub. These LEDs, coupled with an infinity mirror, create stunning lighting effects with maximum brightness. The infinity mirror is layered, with 0.5 mm breaks for added definition visible from every angle. The 3D effect and geometric frame result in a bold look that enhances any gaming PC. In addition, the aluminum trim further reflects the lighting, making it visible along all edges and sides of the frame.Improved Features
Previously, Lian Li ARGB PWM fans required separate cables for power and lighting. Now, the Lian Li UNI FAN SL-INF 120 uses a single cable with a 7-pin connector that delivers both power and lighting. This connects to the new UNI HUB, included with SL-INF 120 triple packs. Single pack models have a split cable with both a 4-pin PWM and a 3-pin ARGB header, allowing for direct connection to the motherboard.Daisy-chaining functionality is also improved. The Lian Li UNI FAN SL-INF 120's connector key, which slots into the frame of an adjoining fan, can be easily removed—simply twist it 90° and pull from the frame. This increases the SL-INF 120's radiator compatibility and leaves no protruding parts for a cleaner look. If needed, the key can be reinstalled just as easily.
Additionally, the Lian Li UNI FAN SL-INF 120 features better cable management. The cable module is smaller than previous versions and is now centrally located on the fan frame edge. It can be oriented in several ways to optimize cable routing for your build.
UNI HUB and L-Connect 3
The triple packs include the UNI HUB controller, optimized for cohesive device support. The hub now offers two 3-pin ARGB SM ports, specifically for other Lian Li ARGB devices such as LEDs on the Galahad AiO pump. There are also four ports supporting up to sixteen UNI FANs, in four groups of four.Lighting and fan control are managed through Lian Li's updated L-Connect 3 software or your motherboard software for single fans. You can assign each group a fan speed or mode to suit your needs. With over 30 lighting effects and a full spectrum of 16.8 million colors, you can create dynamic lighting shows. Effects can be applied to just the fan's center, the edge, or both. The Lian Li UNI FAN SL-INF 120 gives you the flexibility to achieve stunning RGB effects.
Technical Details:
- Dimensions: 120 x 122.1 x 25 mm (W x H x D)
- Materials: PBT, Aluminum
- Color: White
- Fan:
Bearing Type: Fluid Dynamic Bearing
Fan Speed: 200 - 2,100 RPM
Acoustic Noise: max 29 dB(A)
Airflow: max 61.3 CFM (104.14 m³/h)
Air Pressure: max 2.66 mmH2O
Operating Voltage: 12 V
Start Voltage: 6 V
Input Current: 0.18 A
Input Power: 5.16 W - Lighting:
Type: Digitally Addressable RGB
No. of LEDs: 40
Input Current: 0.6 A - Connection: 7-pin combined PWM ARGB
- Controller Connections:
4x 7-pin combined ARGB and PWM
2x 3-pin SM JST for ARGB components
2x SATA (max. input 29 watts)
1x 9-pin USB for connecting to a 9-pin header on the motherboard
3-pin 5V ARGB and 4-pin PWM for connecting to the motherboard - Warranty: 2 years
For more detailed information, please contact customer service via email or the chat window.
Technical details
Dimensions120x120x25
Diameter120 mm
Noise29 dB
ColourWhite
Warranty (months)24
Number of fans3
Product can only be ordered
Product is not currently available in stores.
Fast shipping
Available to order:
Ordering to a store 1-4 working days.50 pcs