Lian Li UNI FAN SL-INF 120 ARGB Reverse Blade PWM Fan 3-Pack with Controller, 120mm, White
- Fan diameter: 120
- Fan connector: 7-pin
3-pack of 120 mm PWM intake fans in white with aluminum frame
Convenient plug-in system for fewer cables
40 digitally addressable RGB LEDs and infinity mirror effect
Speed and lighting controllable via software
Max. 2,100 RPM at 32 dB(A)
108.05 m³/h max. airflow and max. 2.02 mmH2O static pressure
Rubber dampers for vibration reduction
Note: Plug-in system only compatible with LULI-028, LULI-029, LULI-030, or LULI-031
The Lian Li UNI FAN SL-INF 120 Reverse Blade: Intake fan with extra power!
The Lian Li UNI FAN SL-INF 120 Reverse Blade is a 120 mm PWM intake fan. The intake fans in the reverse blade variant allow you to achieve a uniform look when used together with conventional UNI FAN SL-INF fans. With the reverse blade fans, you can create airflow in the opposite direction while still showcasing the stylish side with the infinity mirrors. This ensures that, despite reversed airflow, you always see the best side of the fan—delivering a consistent look in your case.
As a further development of the UNI FAN SL, it features improved airflow compared to the UNI FAN SL-INF and is excellent for use on radiators, but it also performs well as a case fan. The clever daisy-chain plug-in system creates a tidy look with minimal cable clutter.
A real highlight of the Lian Li UNI FAN SL-INF 120 Reverse Blade is the powerful ARGB illumination, which, especially in combination with the infinity mirrors, creates spectacular lighting effects.
The installation of the Lian Li UNI FAN SL-INF 120 series follows a clever and unique concept: the fans have pin contacts and are connected with a practical plug-in system. Several UNI FAN SL-INF 120 mm fans are joined into a cluster and no longer need to be connected individually by cable—saving a lot of time and preventing a mess of cables. The pin contacts transmit power as well as PWM and ARGB signals.
Redesigned plug-in system for the Lian Li UNI FAN SL-INF 120 series
The plug-in system introduced with the UNI FAN SL and AL series has been improved again for the UNI FAN SL-INF 120 series. On one hand, the plug-in system is now designed so that the connector can be removed. This prevents possible collisions with radiator fittings and at the same time ensures a tidy look.
Additionally, the connection for the cable module has been made smaller and relocated to the center of the frame, which also makes it easier to use on radiators. The previously separate cables for power and ARGB have been combined into a 7-pin cable that can be routed in two directions. An adapter that separates the two strands for direct connection to the motherboard is included with the single-fan version.
Note: The connectors of the SL-INF series are not compatible with the SL and AL series!
Suitable for cases, radiators, and CPU air coolers
The hydrodynamic bearing of the Lian Li UNI FAN SL-INF 120 Reverse Blade ensures smooth running and a long lifespan. Thanks to reduced friction losses, higher speeds can be achieved at the same energy consumption compared to conventional fans. The effective RPM ranges from 200 to 2,100. If desired, the fans can be completely switched off via software.
At up to 32 dB(A) under full load, the UNI FAN SL-INF 120 Reverse Blade is not excessively loud and offers strong performance values with 108.05 m³/h airflow and 2.02 mmH2O static pressure at full speed.
Powerful ARGB lighting and infinity mirror
The Lian Li UNI FAN SL-INF 120 Reverse Blade features a total of 40 digitally addressable RGB LEDs. These are distributed between the hub of the rotor and two thin strips in the aluminum frame. Infinity mirrors are also built into the front of the hub and on two sides, uniquely enhancing the lighting effects.
To control the speed and ARGB lighting, you can connect fan clusters directly to the motherboard via an adapter. They are detected by the free L-Connect 3 software and can be configured through it. Alternatively, you can connect the 7-pin cable to one of the two ports on the L-Connect 3 controller, which is included with the triple-pack versions of the UNI FAN SL-INF fans (LULI-028, LULI-029).