AXAGON ADE-XR Fast Ethernet 10/100 Adapter USB 2.0 Type A
The compact AXAGON ADE-XR adapter easily converts a USB 2.0 port into a Fast Ethernet 10/100Mbit port.
The network card offers wide compatibility as well as a full range of features such as an IPv4/IPv6 checksum engine to reduce CPU load, crossover detection and auto-correction, TCP large send offload, various Wake-on-LAN modes, and advanced Power Management features.
In modern operating systems such as Windows 8.1 and later, the USB adapter allows easy automatic installation without the need for an Internet connection.
The USB Ethernet adapter easily expands your computer with a missing RJ-45 network connector, adds another network card, or replaces the original broken network connection.
Support for all current versions of Windows, Mac OS X, and Linux allows it to be used with any desktop computer, laptop, or ultrabook. This adapter, with a suitable reduction* also allows an internet connection via an Ethernet cable for some Android phones and tablets.
Input:
- USB 2.0 interface, backward compatible with USB 1.1.
- Supports transmission rates of 480 / 12 / 1.5 Mbit/s (high / full / low speed).
- USB 2.0 connector type A male on a permanently attached 5 cm cable.
Output:
- Ethernet interface with RJ-45 connector for UTP or STP cable connection.
- Supported transmission rates for the Ethernet interface: 10/100 Mb/s.
- Supports IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX specifications.
- 10/100 Mb/s auto-detection.
- Supports Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) to reduce processor load.
- Supports Segmentation Task-offload (Large send v1 and Large send v2).
- Supports full-duplex transmission with IEEE 802.3x flow control.
- Supports IEEE 802.1P Layer 2 priority encoding.
- Supports IEEE 802.1Q VLAN tagging.
- Supports IEEE 802.3az-2010 (EEE) Energy Efficient Ethernet - reduces power consumption at rest.
- Supports Auto MDI/MDIX - crossover detection and auto-correction eliminate the need for crossover cables.
- Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors.
- Supports Pair Swap/Polarity/Skew Correction.
Other features:
- Full Plug and Play and Hot Plug support.
- Supports CDC-ECM for automatic driver installation across different OS.
- Adapter powered via USB (bus power) - no auxiliary power supply required.
- 3x LED indicators for network activity, 100Mbit link and transmission mode, and connection of the adapter to USB.
- Dimensions: 72 x 27 x 16.5 mm, USB cable length: 5 cm, weight incl. USB cable: 23 g.
- Uses the Realtek RTL8152 chipset.
Supports Wake-on-LAN feature in different modes:
- Supports sleep mode and remote wake-up via AMD Magic packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and also Link Change wake-up.
- Supports the ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers.
- RealWoW! technology support allows remote wake-up over the Internet.
Advanced Power Management features:
- The adapter supports advanced power management to reduce losses during standby or light network traffic. It also supports advanced power saving when the Ethernet cable has been disconnected.
- Supports Advanced Configuration Power management Interface (ACPI).
- Supports Power Management offload (ARP & NS).
- Supports Microsoft Always On Always Connected (AOAC).
- Supports Intel Converged Platform Power Management (CPPM).
- Supports Link Power Management (LPM).
- Supports Operating System-directed Power Management (OSPM).
Supported operating systems:
- MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32-bit and 64-bit versions of Windows are supported), Mac OS X 10.6 and higher, Linux kernel 2.6.x and above, most versions of Android.
- WARNING - check with the Android device manufacturer whether Ethernet connection is supported.