AXAGON EE35-XA3 External 3.5" SATA HDD Case USB 3.0 Aluminium Black
The compact aluminum AXAGON EE35-XA3 ALINE external enclosure with a high-speed USB 3.2 Gen 1 (USB 3.0) interface is designed for 3.5" SATA drives.
UASP support enables you to achieve the maximum possible speed with modern hard drives.
Allows reading of S.M.A.R.T. information to monitor the external disk's status. Supports spinning down the connected drives as well as the enclosure itself.
The durable cast aluminum enclosure offers excellent mechanical protection for the drive and outstanding heat dissipation.
The discreetly shaped case with a brushed finish provides an elegant look while preventing unwanted fingerprints.
Easy hard disk installation as well as automatic setup can be managed even by beginners, allowing you to easily create an external drive.
Input:
USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transfer rates up to 5 Gbit/s.
Connection via micro USB type B female connector.
Device support:
SATA II - 3 Gb/s (300 MB/s) interface,
Supports 3.5" HDD.
Features:
Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0.
Supports transfer rates of 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).
Supports 3.5" SATA III / II / I drives of all capacities without limitation.
Complies with Serial ATA 2.0 specification (SATA/300), transfer rates up to 3 Gb/s (300 MB/s).
Complies with Serial ATA 1.0 specification (SATA/150), transfer rates up to 1.5 Gb/s (150 MB/s).
The total bandwidth/transfer rate of the enclosure is determined by the SATA/300 interface used (theoretical 3 Gbit/s).
Supports UASP (USB Attached SCSI Protocol).
SSD/HDD boot support in external enclosure.
Hot Plug support allows connecting your device while running.
Full Plug and Play support.
HDD Auto Spindown support - automatically spins down the disk after 10 minutes of inactivity.
HDD Turn Off - turns off the disk after removing the device or shutting down the PC.
Connection via durable large USB 3.2 Gen 1 Type B female connector.
An 80 cm USB-B / USB-A cable is included.
A discreet blue LED indicates connection to the computer’s USB port (steady light) and data transfer (blinking).
The durable enclosure body is cast aluminum alloy; the end panels are plastic.
Simple disk installation - the guides are mounted on the disk, the disk plugs directly into the motherboard’s SATA connector, and is inserted into the enclosure; the front panel is fastened with two screws using the included screwdriver.
Compact adapter dimensions: 180 x 120 x 32 mm.
Enclosure weight: 244 g (without cables and disk).
Power supply:
Powered by a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm supply cable.
Power switch on the rear panel of the enclosure.
AC adapter dimensions: 74 x 36 x 91 mm (incl. plug).
AC adapter weight: 128 g (incl. supply cable).
Supported OSs:
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows OS versions supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
Note: Drivers are included with supported operating systems and install automatically. No other drivers need to be installed and no additional drivers are available.
Package contains:
USB 3.2 Gen 1 external enclosure for 3.5" SATA drive,
80 cm USB-B to USB-A cable,
100-240V / 12V-2A power adapter,
mounting rails, screws, and screwdriver,
stand for vertical operation,
printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
packaged in a cardboard box.