AnyCubic Wash & Cure 3 - Print cleaning and drying device
AnyCubic Wash & Cure 3 print cleaning and drying device.
Take care of the proper finishing and curing of your 3D prints. The AnyCubic Wash & Cure 3 washing and drying device features an enlarged design that makes it great for models of different sizes. It allows cleaning both in a basket and with a platform. In doing so, it works surprisingly quietly and offers several operating modes to choose from. You can also manually adjust the cleaning and curing times.
It even accommodates larger prints
The capacity of the device's basket is 3 l, and the total capacity of its cleaning module is as much as 4 l. Thus, with its help you can easily clean prints up to 165 x 100 x 180 mm (in the basket) or up to 165 x 100 x 165 mm (with the platform). On the other hand, the dimensions of the curing space are 160 x 180 mm.
Ideal for curing
The device is distinguished by its carefully thought-out design and optimized arrangement of LEDs to ensure comprehensive, even curing of models. You will also find in the set an additional UV lamp with a bendable design, which is distinguished by an energy level of 30,000 μW/cm2 and a radiation range from 1 cm to 3 cm. With its help you will successfully cure, for example, selected details of prints.
Improved design, higher efficiency
The device's basket was made of rust-resistant double-layer PP plastic, and thanks to its improved design, it allows you to clean prints placed on the platform. It also allows you to choose from 2 heights - 100 mm and 165 mm. So you can adjust it to the size of your model to optimize IPA consumption.
Convenient operation
The device allows you to choose from 3 modes of operation, such as washing, curing and FlexiCure enhanced curing using the included UV lamp. You can also adjust the cleaning and drying time from 1 minute to 30 minutes. The Wash & Cure 3 model is operated with a convenient-to-use dial and touch-sensitive buttons.
Low noise level
Don't be afraid of annoying noise. The Wash & Cure 3 model features a sealed design and optimized software, so it can deliver exceptional performance while keeping the noise level low - only about 65 dB. Relax or get on with your work while the device washes and cures your prints - nothing will disturb you.
Included
Print washing and drying unitCleaning moduleCleaning basketStick x4Curing tableUV lamp with bendable designAllen wrench setPower supplyUser manual
| Manufacturer | AnyCubic |
|---|---|
| Model | WS3A0WH-Y-O |
| UV light source | 10 diodes 405 nm + lamp with adjustable design |
| Operation modes | Cleaning, curing, FlexiCure |
| Rated power | 36 W |
| Input voltage | 100-240 V 50/60 Hz |
| Cleaning / curing time adjustment | 1-30 min |
| Max. dimensions of the model to be cured | ø160 x 180 mm |
| Max. dimensions of the model to be cleaned | With platform: 165 x 100 x 165 mm; Without platform: 165 x 100 x 180 mm; |
| Control panel | Touch buttons, dial |
| Material (cleaning basket, cleaning module, curing table) | PP |
| UV lamp height | 285 mm |
| Dimensions | 216 x 217 x 310 mm |
| Weight | 2.7 kg |