QOLTEC 51630 Qoltec Thermal paste 1.42 W/m-K 0.5g White

thermal pad 15x15x5mm (1 piece)

Alphacool double-sided adhesive pad 120x20x0,5mm

Alphacool's entry into the thermal compound market: Alphacool Silver Grease! Everyone needs thermal compound when assembling or working on a system. Of course only the best should be used for the finished system, but the cost of the thermal compound also needs to be considered. Especially when using expensive thermal compounds, things can get rather expensive when just testing a few different set-ups. This is where the new Alphacool Silver Grease is the ideal alternative: For some this is an affordable st...

thermal pad 30x30x1mm (1 piece)

QOLTEC 51631 Qoltec Thermal paste 1.42 W/m-K 1g White

Heatsink thermal paste grease, 1.5 g weight Thermal compund (grease) for heatsinks Helps the heat dissipation from a CPU, chipset or processor to a heatsink Excellent thermal impedance Perfect stability - will not separate, run, migrate, or bleed Non capacitive or electrically conductive 

QOLTEC 51635 Qoltec Thermal paste 2.5 W/m-K 1g grey

QOLTEC 51646 Qoltec Thermal paste 3.17 W/m-K 0,5g silver

Heatsink thermal paste grease, 3 g weight Thermal compund (grease) for heatsinks Helps the heat dissipation from a CPU, chipset or processor to a heatsink Excellent thermal impedance Perfect stability - will not separate, run, migrate, or bleed Non capacitive or electrically conductive 

These self-adhesive thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pa...

The IC Value V1 is a high performance thermal compound with high thermal conductivity and low thermal resistance. It can prevent your pc components from short circuit incidence due to its traits of non-curing and non-electrical conductive. The IC Value V1 can achieve very efficient heat dissipation and is ideal for CPU, GPU cooling or other applications. •High Thermal Conductivity •Low Thermal Resistance •Electrically Non-Conductive •Non-Curing •Non-Capacitive •Non-Corr...

Thermal pad 1mm (120x20mm) for ramplex, innovatek, Mips, Koolance

QOLTEC 51640 Qoltec Thermal paste 3.05 W/m-K 1g gold

These self-adhesive thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pa...

When putting down, nothing beats smooth and easy. That is why we created the PK-2 thermal compound. The PK-2 thermal compound is a high performance thermal bonding agent specially designed for easy application.PK-2's core feature is its low viscosity, allowing for one to quickly and easily apply the thinnest coat of thermal compound possible.This will get your components up close and personal in no time.

QOLTEC 51645 Qoltec Thermal paste 3.17 W/m-K 1g silver

QOLTEC 51650 Qoltec Thermal paste 4.63W/m-K 1g grey

CM THERMAL GREASE

COOLERMASTER E1 IC ESSENTIAL Super Thermal Compound,GreaseRG-ICE1-TG15-R1The IC Essential E1 is a high performance thermal compound to meet the requirements of mainstream CPU cooling. With its low thermal impedance and appropriate viscosity, IC Essential E1 can provide very efficient heat transfer and can be spread easily and evenly. t's also bundled with a grease cleanser that allows you to easily clean old thermal grease...

Heat-conductive paste Silver Tim This thermal paste now comes in an especially compact 1.5g tube! Specifically for small cases which are often difficult to acces, the paste can be easily applied. It offers the usual high quality by Xilence and disposes of a good thermal conductivity and thus guarantees efficient cooling of the CPU. As it does not conduct electricity, there is no risk that any other high-quality components might be destroyed.

SILICON 701 Genesis Silicon 701 is thermal paste that will live up to the expectations of powerful PCs owners, whose systems are built from components that require exceptional solutions to achieve optimal working temperatures. FOLLOWS ALL REQUIREMENTS To meet those high-demands Silicon 701 grease possesses high thermal conductivity, low thermal resistance, does not conduct electricity, does not corrode and does not require curing time it achieves optimal thermal performance from the very first power-up ...

Phobya HeGrease Standard 3.5g

SILENTIUMPC Pactum PT-1 Thermal Compound 4mg

SILICON 801 Genesis Silicon 801 is thermal paste that will live up to the expectations of powerful PCs owners, whose systems are built from components that require exceptional solutions to achieve optimal working temperatures. FOLLOWS ALL REQUIREMENTS To meet those high-demands Silicon 801 grease possesses high thermal conductivity, low thermal resistance, does not conduct electricity, does not corrode and does not require curing time it achieves optimal thermal performance from the very first power-up ...

QOLTEC 51637 Qoltec Thermal paste 1.93 W/m-K 5g grey

These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. Due to the very good elastic pressure and the low hardness a very good adaptation to the surfaces is already achieved by a low contact pressure. All large and small height differences are compensated, even from microscopic grooves to visible bumps. The surface of the pad is covered with a protective film which must be removed before use. Of course, these heat-conducting pads can al...

THERMAL PASTE Natec Husky Pack is thermal paste with high thermal conductivity and low thermal resistance. Grease itself does not conduct electricity, does not corrode and does not require curing time (optimal thermal performance after first cycle). Handy syringe allows easy and multiple applications. Package includes 10pcs 1g/0,2ml each.

Tri-Linear Ceramic Content: Like the original Céramique, Céramique 2 uses only ceramic fillers so it is neither electrically conductive nor capacitive. The tri-linear composite of aluminum oxide, zinc oxide and boron nitride allows the thinnest possible bond line with modern processors, heatsinks and electronics. Critically-sized particles and new ultra-high shear mixing techniques maximize Céramique 2's thermal performance and help maintain a stable homogenous suspension. This exclusive combination pr...

SILICON 851 Genesis Silicon 851 is an extremely efficient thermal grease that will meet the high expectations of users looking for uncompromising solutions. THERMAL CONDUCTIVITY= 13,4W/mK Very high thermal conductivity will allow use of full potential that cooler provides. CONVINIENT SIZE Silicon 851 is enclosed in convinient-size syringe, which hold 0,5g/0,2ml thermal grease      

Xilence X5 thermal paste was specifically designed for high-end processors. The very high thermal conductivity ensures for an efficient heat exchange and low temperatures! The paste works reliably at temperatures from -50 to +300°C – therefore, it is particularly well suited for extreme overclocking. Since the X5 is not electrically conductive, there is no danger for the surrounding hardware! Contents: 2.5 g.

QOLTEC 51638 Qoltec Thermal paste 1.93 W/m-K 30g grey