UTP passive PoE adapter kit, 0.15 m Perfect for use with IP-cameras Transfers power and data over single Ethernet cable Plug and Play: no installation or configuration required This passive Power over Ethernet injector + splitter adapter kit is an ideal solution to supply e.g. your IP Camera with power and data without adding an extra cable. This kit contains 2 adapters which manage the power and data transfer over only o...

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.IEEE 802.3af compliantAdjustable output powerPlug-and-Play installation

PoE Injector, 24VDC, 12W

The ETH-SP is engineered to protect any Power‑over‑Ethernet (PoE) or non‑PoE device with connection speeds of up to 1 Gbps.

PoE power supply is used to power devices using PoE technology. This allows you to run the system with only one cable, which transmits both data and power supply. Warning! If the power supply is designed for continuous operation (24h) is the rated current of the power supply should not exceed 80% of maximum current. Mains cord included. PoE Standard: IEEE 802.3at Input voltage:100 V ... 240 V AC Output voltage: 48 V DC Max power:  24 W

PoE Injector, 24VDC, 24W

PoE Injector, 48VDC, 24W

PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events. 48VDC @ 0.5A

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. IEEE 802.3af compliant Auto-determine the necessary power requirements Plug-and-Play, requires no configuration

PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events. - POE-48-24W-G has a Gigabit LAN port - 48VDC @ 0.5A Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: • Surge protection • Clamping protection • Maximum surge discharge • Peak pulse current • AC cable with earth ground Electrostatic discharge (ESD)...

PoE Injector, 48VDC, 24W (RocketTi, UAP-Pro)

PoE Injector, 50V, 60W , airFiber PoE

The ePoE technology of Dahua adopts advanced 2D-PAM3 coding modulation from physical layer, and realizes full duplex transmission over 800 meters at the speed of 10Mbps, or 300 meters at the speed of 100Mbps via Cat5 or coaxial cable media. Dahua ePoE technology offer a new way to accomplish long distance transmission between IP camera and network switch. It allows more flexible surveillance system design, improves reliability and saves construction and wiring cost. Supports IEEE802.3, IEEE802.3u standar...

Support passive PoE cascade power supply and Ethernet data exchangeSupport IEEE 802.3af/at standard power supply IP CameraCooperating with High PoE Midspan (PFT1200), able to cascade level 2 PoE Extender, connect to 3 IPC (power consumption

Supports IEEE802.3, IEEE802.3u standards Supports IEEE802.3af and IEEE802.3at power supply standards Port: 1*RJ45 10/100Mbps (PoE OUT), 1*BNC (IN) Supports RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps Supports MDI/MDIX self-adaption Supports long range power supply transmission via coaxial cable Operating Temperature: -30°C-65°C DIN rail mount

Supports IEEE802.3, IEEE802.3u standards Supports IEEE802.3af and IEEE802.3at power supply standards Port: 1*RJ45 10/100Mbps (PoE IN), 1*BNC (OUT) Supports RG59 coaxial cable: 400m/100Mbps, 1000m/10Mbps Supports MDI/MDIX self-adaption Supports long range power supply transmission via coaxial cable Operating Temperature: -30°C-65°C DIN rail mount

PoE+ Midspan > Supports IEEE802.3af, IEEE802.3at standard > Conform IEEE802.3, IEEE802.3u and IEEE802.3ab standards   Ethernet Port: 1*10/100/1000 Base-T, 1*10/100/1000 Base-T( PoE power supply) Power output ≤30W PoE Protocol: IEEE802.3af, IEEE802.3at Power AC100~240V 50/60Hz Working Temperature -10°C~55°C Weight 250g Dimension: 132.3mm×60mm×33mm  

AXIS T8120 Midspan 15 W 1-port Reduced installation costs IEEE 802.3af compliance